CLICK HERE TO RETURN TO HOME PAGE


                                   

Quality,
by Design

00505.2.jpg (65268 bytes) 
00505 Series Line Swivel. - NOT SUITABLE FOR DIRECTIONAL DRILLING

DCD Line Swivels are typically constructed with a thrust bearing for tensile load and a radial bearing for bending load. They combine a high safe working load with a compact design. All sizes incorporate an oil seal and are manufactured from high strength Stainless Steel. 

DCD has recently added Locking Line Swivels (e.g. 00505-000A) to their product line these are typically constructed with a Bronze thrust bearing for tensile load and a radial bearing for bending load. They combine a high safe working load with a compact design. All sizes incorporate an oil seal and are manufactured from high strength Stainless Steel. Due to the use of a Bronze bearing in place of a Roller bearing, rotation will only continue up to a certain load, much less than the Safe Working Load. Once past this point, then rotation will only occur when pulling tension is relieved. 

Sizes 00505-020 and larger are supplied with a grease point for lubrication.  This is particularly useful if used if used in overhead applications where high speed rotation is possible. 

All sizes of both types are pull tested to verify the 3:1 safety factor and all sizes are fully capable of rotation at full working load.  Test certificates are available upon request. 

Sizes 00505-025 and larger are supplied with hexagon Clevis Pins. Smaller sizes have slotted Clevis Pins. 

For clevis detail and pin replacement see catalog sheet Series 00000.  Under no circumstances should alternate Clevis Pins be used. 

Note:  Line swivels are not designed to run around bull wheels and severe damage or injury may be incurred if this is done.

Key Benefits

  • Compact design
  • High safe working load
  • Manufactured from high tensile stainless steel

Line Swivel Part Number

 Line Swivel Part No. Non-Swiveling

*Safe Working Load 3:1 Underground

Overall
Diameter

 Overall
Length

Net Weight

00505-005

-

750 lb.

5/8"

 2 1/2"

0.13 lb.

00505-010

00505-010A

2,250 lb.

7/8"

 3 3/8"

0.34 lb.

00505-015

00505-015A

3,500 lb.

1"

 3 7/8"

0.50 lb.

00505-020

00505-020A

5,000 lb.

1 1/4"

 4 3/4"

1.00 lb.

00505-025

00505-025A

7,000 lb.

1 3/8"

 5 1/8"

1.40 lb.

00505-027

00505-027A

9,000 lb.

1 1/2"

 5 5/8"

1.70 lb.

00505-030

00505-030A

10,000 lb.

1 5/8"

 6"

2.10 lb.

00505-035

00505-035A

15,000 lb.

2"

 7"

3.80 lb.

00505-040

-

30,000 lb.

2 3/8"

 10"

7.60 lb.

00505-045

-

50,000 lb.

3"

 13"

17.00 lb.

For more details, please refer to the specifications sheet and operation sheet.

Click here to download a printable copy of these  specifications

Click here to download a printable copy of the catalog page for these products.

Back to top

* Note: To print on one page, it may be necessary to decrease left and right margins in page setup

Send mail to sales@dcddesign.com with questions or comments about anything DCD related. We want to hear from you!