CLICK HERE TO RETURN TO HOME PAGE
Fiber Optic Sheaves & Quadrants

Above
Catalog Page
                                   

Quality,
by Design

32200 FO.jpg (152521 bytes)

    Series 32200

For pulling Fiber Optic cable, DCD has a special series of sheaves and quadrants that will allow the maximum possible bend radius for the application.  All the sheaves are aluminum while the quadrant side plates are 3/16" steel, giving the best combination of light weight and strength. 

The F/O Quadrant has 12 rollers set on a 26" radius giving the cable a minimum of 26-3/4" inside bend radius.

The one piece F/O Sheave is sized to fit through a 24" manhole and both the sheave and the quadrant can be used in the DCD Manhole Brace.

The hanger arms also separate easily to allow insertion of the sheave in the middle of the pull.

F/O Quadrant c/w Single Hanger Single Hanger only F/O Quadrant c/w Double Hanger Double Hanger Only Quadrant Only Sheave Only Sheave Size
 W x Dia.
32200-312 32830-301 32220-312 32810-301 32210-312 32900-303 3" x 3"
 
F/O Sheave c/w Single Hanger Single Hanger Only F/O Sheave c/w Double Hanger Double Hanger 
Only		 F/O
 Sheave Only		 Sheave
 Size
W x Dia.
32000-324 32800-300 32100-324 32810-300 32900-324 3" x 24"

Back to Top

 

* Note: To print on one page, it may be necessary to decrease left and right margins in page setup

Send mail to sales@dcddesign.com with questions or comments about anything DCD related. We want to hear from you!