CLICK HERE TO RETURN TO HOME PAGE
Model K Lasher

Above
Catalog Page
                                   

Quality,
by Design

 

               Model K.jpg (410767 bytes)

                           61500  Model K Lasher

The Model K pull type Lasher handles just about any size lashing job.  Use it to single- or double-lash a single cable up to 3 1/2" outside diameter and multiple  cables up to a combined outside diameter of 4 5/8".

The rotating drum on the Model K makes one revolution every 13".  Load both payout reels to create a double lash with a support every 6 1/2"......  or load one payout reel for a single lash support every 13".  As with all DCD lashers the Model K operates without strand traction, even in bad weather.  You control the tension of the lashing wire in the field by adjusting the tension rollers.

Use the Model K in wet weather or in tight places in trees.  Front end ratchets prevent the lasher from backing up on the strand when forward pressure is released.  Thanks to the wire friction drive feature of the Model K you may overlash existing cable without removing the old lashing wire. The Model K uses all types and sizes of lashing wire from .045" to .091".  The 1AK metal reel and a cone shaped hub are optional features.  The straight hub wire spool is standard.

DCD Part #

Model

Max Strand

Max Lash

Wire Size

Spool size

Overall Dims

Weight

61500-000

K (400)

1/2"

4-5/8” dia.

.045” - .091”

1200 ft / coil

19” x12" x 12”

39 lb.

Back to top

 

* Note: To print on one page, it may be necessary to decrease left and right margins in page setup

Send mail to sales@dcddesign.com with questions or comments about anything DCD related. We want to hear from you!