CLICK HERE TO RETURN TO HOME PAGE
The Applicators

Above
Catalog Page
                                   

Quality,
by Design

 

THE APPLICATORS

The extreme liquid consistency of TUBE-LUBE® 326  (SG = 1.04) minimizes viscous friction and allows it to be easily pumped or sprayed.  In fact, one of the big attractions of this product is its ease of application.

DCD offers several different ways to apply the lubricant right onto the cable:

Manual Applicator Kit - manually pressurized, twin tanks

35100-Tanks no background.jpg (2291854 bytes)

This unit consists of two tanks mounted together with a pressure manifold complete with pressure gauge.  This allows the user to monitor very closely the amount of Lube being sprayed onto the cable.  Different pressures allow different volumes.  Lube will be fed from whichever tank has the highest pressure.  For very long pulls, when one tank is empty, the switch to second tank is easy - just pressurize it! That leaves the first tank available for re-filling.  A manual shut-off valve leads to a quick disconnect coupling*.

A 20" long clear hose is included with the Applicator with quick disconnect couplings at each end.  This allows the Applicator and operator to remain outside the manhole, while the connection to the duct is up to 20' away.
Back to top

Power-Spray™ Applicator Kit - battery operated, backpack

35100-002 Backpack.jpg (459844 bytes)

This unit holds a little over 4 gallons and can be carried on the operator's back. A 4-speed pump controls the volume of lube applied.  The pump is operated by a re-chargeable battery with about 8 hours of usage time.  Thus unit comes complete with re-charger and a spare battery.  The outlet hose also leads to a quick disconnect coupling*.

A 20" long clear hose is included with the Applicator with quick disconnect couplings at each end.  This allows the Applicator and operator to remain outside the manhole, while the connection to the duct is up to 20' away.
Back to top

Applicator Kits

Part No.

Description

Weight

35100-000

        Manual Applicator Kit             (c/w 20" hose assembly)

10 lb.

35100-002

 Power-Spray™ Applicator Kit (c/w 20" hose assembly) 19 lb.

35100-040

 Hose Assembly - 20" Long 2 lb.

35100-050

 Battery for Power-Spray™ 2 lb.

35100-051

 Battery Charger for Power-Spray™ 2 lb.

*In both cases, the exit hose disconnect coupling and 20" long hose can attach to any of several other DCD products.  See Application Methods

Back to top

 

* Note: To print on one page, it may be necessary to decrease left and right margins in page setup

Send mail to sales@dcddesign.com with questions or comments about anything DCD related. We want to hear from you!