|
Above
Quality,
by Design
| |
The following Pulling Grips can be used for
Underground applications.
Please use the following list to advance to the page
of your interest, or simply scroll down the page:
00670-00671
- Double Weave, Single Eye
00680
- Double Eye, Single Weave, Shoulders
00690
- Double Weave, Rotating Head, Shoulders
00670 & 00671 series
DOUBLE WEAVE - SINGLE EYE
THREE LENGTHS AVAILABLE
These grips offer a Flexible Eye and Double Weave galvanized wire construction
for the regular load pulls.
DCD
Part Number
|
Size Range |
Approx.
Breaking Strength |
Mesh
Length |
Weight |
00670-025 |
0.24" to
0.37"
|
4,250
lb. |
18" |
0.3
lb. |
00670-038 |
0.38" to
0.74"
|
5,000
lb. |
18" |
0.3 lb. |
00670-050 |
0.75" to
1.12"
|
6,600
lb. |
18" |
0.4 lb. |
00670-100 |
1.13" to
1.49"
|
10,000
lb. |
21" |
0.6 lb. |
00670-125 |
1.50" to
1.99"
|
13,800
lb. |
23" |
1.3 lb. |
00670-200 |
2.00" to
2.49"
|
14,200
lb. |
24" |
1.4 lb. |
00670-250 |
2.50" to
2.99"
|
17,500
lb. |
28" |
1.7 lb. |
00671-080 |
3.00" to
3.74"
|
18,000 lb. |
30" |
1.9
lb. |
00671-095 |
3.75" to
4.24"
|
26,500 lb. |
32" |
2.3
lb. |
Catalog
Page
back to top
00680 series
DOUBLE WEAVE - SINGLE EYE - SHOULDERS
These grips offer a Flexible Eye with Shoulders and Double Weave
galvanized wire construction. The shoulders offer added protection to the
utility being pulled in as well as protecting the leading wire strands.
Always read Breaking Strength, safety and technical data information.
DCD
Part
Number |
Size Range |
Approx.
Breaking Strength |
Mesh Length |
Weight |
00680-025 |
0.25" to
0.49" |
4,800 lb. |
18" |
0.4 lb. |
00680-038 |
0.50" to
0.74" |
5,800 lb. |
24" |
0.4 lb. |
00680-050 |
0.75" to
1.12" |
6.700 lb. |
24" |
0.5 lb. |
00680-100 |
1.13" to
1.49" |
10,000 lb. |
24" |
0.6 lb. |
00680-125 |
1.50" to
1.99" |
16,400 lb. |
24" |
1.3 lb. |
00680-200 |
2.00" to
2.49 |
18,500 lb. |
24" |
1.5 lb. |
00680-250 |
2.50" to
2.99" |
24,500 lb. |
36" |
2.5 lb. |
00680-300 |
3.00" to 3.74" |
24,500 lb. |
36" |
2.7 lb. |
00680-350 |
3.75" to
4.24" |
31,000 lb. |
42" |
4.2 lb. |
00680-400 |
4.25" to
4.99" |
31,000 lb. |
48" |
4.9 lb. |
Catalog
Page
back to top
00690 series
DOUBLE WEAVE - ROTATING HEAD - SHOULDERS
These grips offer a Flexible Eye with Shoulders and Double Weave galvanized
wire construction. The shoulders help to protect the leading edge of the cable
or ducting and this type should be used for heavy duty applications.
Always read Breaking Strength, safety and technical data information.
DCD
Part
Number |
Size Range |
Approx.
Breaking Strength |
Rotating Head Diameter |
Mesh Length |
Weight |
00690-038 |
0.50" to
0.74" |
5,800 lb. |
7/8" |
16" |
1.5 lb. |
00690-050 |
0.75" to
1.12" |
6,700 lb. |
7/8" |
24" |
1.6 lb. |
00690-100 |
1.13" to
1.49" |
13,000 lb. |
1
3/8" |
33" |
1.9 lb. |
00690-125 |
1.50" to
1.99" |
16,500 lb. |
1
3/8" |
36" |
2.3 lb. |
00690-200 |
2.00" to
2.49" |
21,000 lb. |
1
5/8" |
36" |
3.8 lb. |
00690-250 |
2.50" to
2.99" |
33,000 lb. |
1
7/8" |
38" |
5.0 lb. |
00690-300 |
3.00" to 3.74" |
41,000 lb. |
1
7/8" |
39" |
5.2 lb. |
00690-350 |
3.75" to
4.24" |
48,000 lb. |
1
7/8" |
42" |
9.2 lb. |
00690-400 |
4.25" to
4.99" |
48,000 lb. |
1
7/8" |
58" |
9.9 lb. |
Note! Note! The Rotating Head does not replace the use of a
Pullback Swivel. There are no bearings to allow rotation under load and severe damage may
occur to the utility being installed if this product is used without a proper swivel.
Catalog
Page
back to top
|
