CLICK HERE TO RETURN TO HOME PAGE
Duct Rodder Accessories

Above
Splice Connectors
Flexible Guide Heads
Pulling Eyes
Rod Ends
Swivel Connectors
Roller Guides
Clevis Ends
Miscellaneous
Wire Mesh Grips
                                   

Quality,
by Design

All Duct Rodders are offered in Standard or Deluxe packages. Separate Accessory Kits are available with contents listed in the table below. All accessories are also designed to fit Rodders by other manufacturers and most of their accessories will fit the DCD Rodders.

The larger 5/16", 3/8", 7/16" and 1/2" Rodders are supplied with Stainless Steel accessories and, all components attaching directly to the rod are designed to be glued on in the traditional manner, or can be attached by means of four clamping set screws, or can be both glued and screwed (the accessories supplied on the product at the factory are attached by screws only - they can be glued by the customer if required).

The obvious advantage of the clamping system is that repairs or product changes can be carried out easily in the field with no time delay to allow the glue to dry. Spare set screws and hexagon keys are also supplied.

Accessory Kits

Accessory Kit 
Part No.

 

57000-000

1/8"

57000-001

3/16"

57000-003

1/4"

57000-005

5/16"

 57000-004

3/8"

57000-006

7/16"

 57000-007

1/2"

To suit Fish Tape or Duct Rodder series

  


51000


52000


52500


54000


53500


56000


56500

Accessory Item

Part No. series


Accessory Items included in above Kits

Swivel Rod End

57140

-

-

 -

-

 -

-

 -

Male Rod End

57135

1

1

 -

-

 -

-

 -

Female Rod End

57130

-

-

 -

-

 -

-

 -

Splice Connector

57100

2

2

 1

1

 1

1

 1

Flexible Guide Head

57110

1

1

 1

1

 1

1

 1

Roller Guide

57150

-

-

 1

1

 1

1

 1

Clevis End

57160

-

-

 1

1

 1

1

 1

Glue

57170

1

1

 1

1

 1

1

 1

Gripper

57170

1

1

 1

1

 1

1

 1

Accessory Pouch

57170

-

1

 1

1

 1

1

 1

Back to top

* Note: To print on one page, it may be necessary to decrease left and right margins in page setup

Send mail to sales@dcddesign.com with questions or comments about anything DCD related. We want to hear from you!