Type 2 swivels offer a Clevis connection at both ends with hardened, lockable Clevis pins. This style of swivel is the most common type and is the best for distributing side loads applied on the swivel due to its ability to pivot at either end. On the other hand, it does not allow the operator to push back without proper care and attention or the swivel may fold back on itself. Before rotation is re-commenced, the line must be pulled straight or damage may occur to the clevis ends.

The Clevis Pins are available as spare parts and must never be replaced with any type of pin not manufactured by DCD Design.

These swivels also incorporate all the well established and patented DUB-Swivel design and features.