CLICK HERE TO RETURN TO HOME PAGE
Flexible Cable Guides

Above
Specs. Flex. Cable Guide
Operating Instructions
Duct Entry Adapt. Specs.
Catalog Page
                                   

Quality,
by Design

                         Series 32600

The DCD Flexible Cable Guide comes in 5 ft or 10 ft lengths. Custom Lengths are also available. At each end there is a Polyurethane coupling that can be used for attaching two lengths together or for attaching the Duct Adapter and the Cable Entry Cone.

There are 3 different diameters of Flexible guides. The 4" size has adapters suitable for 2", 2-1/2",  3" and 4" duct sizes, the 5" size only fits 5" duct and the larger 6" unit has adapters suitable for 3-1/2", 4", 5" and 6" ducting.

Each Duct Adapter is fitted with a spray nozzle suitable for the DCD  TUBE-LUBE 326™. There is one half of a quick-disconnect coupling attached to the nozzle that will direct the lubricant onto the cable as it is fed into the ducting.

Like the end fittings, the Duct Adapters are made from polyurethane and are also sold separately.

Flexible Guide Chart

Note:  Custom lengths available.  Contact Customer Service.

Duct Entry Adapter

Part No.	Use With Flexible Guide Diameter	Nominal Duct Size
32620-420	4"	2"
32620-425	4"	2-1/2"
32620-430	4"	3"
32620-440	4"	4"
32620-550	5"	5"
32620-635	6"	3-1/2"
32620-640	6"	4"
32620-650	6"	5"
32620-660	6"	6"

Back to Top

* Note: To print on one page, it may be necessary to decrease left and right margins in page setup

Send mail to sales@dcddesign.com with questions or comments about anything DCD related. We want to hear from you!