Home > Manhole Tools > Hanger Sheaves

	Hanger Sheaves 32000 series Catalog PDF Operation Sheet

DCD offers Single or Double Hangers to go with their new series of cast aluminum sheaves. The Single Hangers are provided with a safety hook and the double hangers have one hook and one pin through which a rope may be fed or other items attached.

The sheaves are all cast aluminum with machined faces and bores. They are then fitted with high load iron-bronze flanged bushings.

All parts are designed to take 10,000 lbs. line load for a 3:1 Safety Factor.

One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be noted that the handle at one end of the pin may be used to support the hanger in a horizontal position should that be necessary.

The sheaves and hangers may be purchased as assemblies or individually as shown in the table below.

"F" designated Flat Bottom Sheave