Channel
Products |
 |
 |
 |
Join our newsletter!
Current Promotions
Click Here for our latest specials.
Toll Free 1-888-794-8357 USA & Canada
Product Groups
Search Our Site
Translate Our Site
Stay Connected
Quality By Design
Skype us!
Load Monitor System - Pulling Tool
Home > Cable Pullers > Load Monitor System
 |
Load Monitor System 40000-200 series Catalog PDF  |
The Load Monitor System (LMS) is a self-contained package that will accurately
determine pulling loads within 10%. It features a digital readout and
is factory set to readout load values from zero up to 6500 lbs.
There are audible alarms for both High and Low speeds - these can be
switched off if the user prefers not to use this feature.
 |
The Load Cell is hard wired to the readout unit. Assembly to
the TUF-Lugger™ is straightforward. The location for the
Load Cell is immediately in front of the Power Pack and assembly
only requires locating the unit and tightening of 2 locknuts. |
|
 |
The LMS unit itself is mounted on top of the Power Pack. Simple removal of the cover allows access to 2 securing bolts for attachment. The cover is then replaced and the electrical supply for the LMS unit is provided by the covered outlet plug in the top of the Power Pack adjacent to the LMS location. No separate supply is needed. Total installation time for the LMS is approximately half an hour. The installation is now permanent and removal is not required for transporting or any other reason. Note also that the LMS unit is fitted with an audible alarm and data sender for optional use of a data recorder. This is not supplied with the unit. |